Speakers
PSS5 Ceiling Speaker
100 mm ceiling mount speaker, 5 Watt, supervised 100 Vrms line, white
PSS5-LP Ceiling Speaker
100 mm low profile ceiling mount speaker, 5 Watt, supervised 100 Vrms line, white
PSS5-BK Ceiling Speaker
100 mm ceiling mount speaker, 5 Watt, supervised 100 Vrms line, black
PSS3 Ceiling Speaker
88 mm ceiling mount speaker, 3 Watt, supervised 100 Vrms line, white
PSS3-LP Ceiling Speaker
88 mm low profile ceiling mount speaker, 3 Watt, supervised 100 Vrms line, white
PSS3-LP-BK Ceiling Speaker
88 mm low profile ceiling mount speaker, 3 Watt, supervised 100 Vrms line, black
PSS1 Sounder Speaker
100 Volt Line Speaker 1.1W
PSSHORN Speaker
100V 3W Horn Speaker
BCS-HS10E Speaker
10 watt IP66 weatherproof horn speaker, supervised 100 Vrms line
C2048 Speaker
10 watt IP 66 marine-grade weatherproof horn speaker, supervised 100 Vrms line
MPH-5300 Speaker
Horn Speaker 30 Watt weatherproof IP66 100 Volt line
PSSB501 Speaker
Pertronic Speaker with B501 Analogue Addressable Base
PSSB401 Speaker
Pertronic Speaker with B401 Conventional Base
PSTIF Strobe Interface
An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits
EXTSPKRHOUS Speaker Housing
Vandal-resistant enclosure for horn speakers. Power-coated zintec.
IMPEDMETER-MK2 Impedance Meter
Hand-held automatic audio impedance meter w. speaker load (wattage) display for 100 volt lines incl. fire & evacuation systems. Rechargeable
PSS5-LPSME Surface Mount Enclosure
PSS5-LPSME Surface Mount Enclosure
PSS3-LPSME Surface Mount Enclosure
PSS3-LP Surface Mount Enclosure available in White and Black
PLPSSBMR Mount
Surface mount ring for speaker base, 125 mm diameter x 20 mm high. Suitable for Pertronic PSSB401 and PSSB501 speakers
Sounders
PS2 Sounder
Pertronic Apartment Sounder
PSBAS2220 Sounder Base
Analogue addressable detector base with built-in sounder
CWSO Sounder
Conventional audible alarm device. Configurable alarm signal, with a choice of 32 recognised signals. Suits 12 volt and 24 volt systems.
SSM Bell
Motor-driven bell suitable for the supervised Bell circuits on Pertronic fire panels, and other signaling applications
ZMB24V Monitor Board
Optional board for Pertronic fire alarm control panels. Allows independent activation of one or more bell circuits
VADs & Strobes
DVAD Dual Strobe
It's designed to provide indoor visual indication for emergency evacuation systems. Available for Wall-Mount and Ceiling-Mount.
SCRL Strobe
L-Series ceiling-mount conventional strobe with seven field-configurable brightness settings. Red body, white flash
SCWL Strobe
L-Series ceiling-mount conventional strobe with seven field-configurable brightness settings. White body, white flash
LX-C-VAD Strobe
Visual alarm device (strobe) for ceiling mounting. Red or white flash. EN54-23 compliant.
LX-W-VAD Strobe
Visual alarm device (strobe) for wall mounting. Red or white flash. EN54-23 compliant.
WST Strobe
Addressable wall-mount plug-in strobes
SRK Strobe
Weatherproof visual alarm device with field adjustable brightness settings. Red body, white flash. IP56 rating
SRL Strobe
L-Series wall-mount conventional strobe with seven field-configurable brightness settings. Red body, white flash
SYS-STR-FIRE Strobe
Visual alarm device (VAD) with red lens and field selectable brightness settings: 3, 16, or 25 candela
PL1 LED Alarm
Pertronic LED Alarm
PSTIF Strobe Interface
An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits
ZMB24V Monitor Board
Optional board for Pertronic fire alarm control panels. Allows independent activation of one or more bell circuits
SBB Mounting Box
Surface-mounting back boxes for L Series alarm (alerting) devices. Available in wall-mount and ceiling-mount variants.
Strobe Lens
Coloured lenses for L-Series and SpectrAlert Advance strobes
Sounder + Strobes
P4RL Sounder Strobe
L-Series wall-mount 4-wire conventional sounder + strobe with configurable tones, volume, and brightness. Red body, white flash
P2WL-P Sounder Strobe
L-Series wall-mount 2-wire conventional sounder + strobe with configurable tones, volume, and brightness settings. White body, white flash
P2RL Sounder Strobe
L Series wall-mount 2-wire conventional sounder + strobe with configurable tones, volume, and brightness settings. Red body, white flash
ZMB24V Monitor Board
Optional board for Pertronic fire alarm control panels. Allows independent activation of one or more bell circuits
PSTIF Strobe Interface
An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits
Amplifiers
EA120 Amplifier
Amplifier for supervised 100 V rms line evacuation systems, 120 watt audio output, 24 volt dc power supply
EA60 Amplifier
Amplifier for supervised 100 V rms line evacuation systems, 60 watt rms audio output, 24 volt dc power supply
ADM-4 Audio Distribution Module
4-way audio distribution module with one 100 volt line input and four independently supervised 100 V rms audio output channels
ADM-2 Audio Distribution Module
2-way audio distribution module with one 100 volt line input and two independently supervised 100 V rms audio output channels
EVAC250W24V Amplifier
Amplifier for supervised 100 V rms line evacuation systems, 250 watt rms audio output, 24 volt dc power supply
EVAC120W24V Amplifier
Amplifier for supervised 100 V rms line evacuation systems, 120 watt rms audio output, 24 volt dc power supply
EVAC50W24V Amplifier
Amplifier for supervised 100 V rms line evacuation systems, 50 watt rms audio output, 24 volt dc power supply
EVAC20W24V Amplifier
Amplifier for supervised 100 V rms line evacuation systems, 20 watt rms audio output, 24 volt dc power supply
EVAC20W12V Amplifier
Amplifier for supervised 100 V rms line evacuation systems, 20 watt rms audio output, 12 volt dc power supply
EVAC50PREA Pre-Amp
Pre-Amp (Mic I/P) for EVAC50W24V Amplifier
EVACGEN EVAC Tone Generator
EVAC Tone Generator Module
PREAMP Pre-amplifier
External Microphone Signal Boost Pre-Amp
PSTIF Strobe Interface
An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits
EAMIC Microphone
Fist microphone with PTT switch for emergency alerting and public address applications. Compatible only with Pertronic EA series amplifiers.
EA Speech Message Tool
Online Text to Speech tool for creating pre-recorded custom speech messages for Pertronic EA series amplifiers
BCEWAPT Blocking Capacitor
Blocking Capacitor Unit for use when connecting analogue addressable modules such as the Apartment Module or M500S to an EWIS 100V-Line
IMPEDMETER-MK2 Impedance Meter
Hand-held automatic audio impedance meter w. speaker load (wattage) display for 100 volt lines incl. fire & evacuation systems. Rechargeable
WIP Phone
The Fire Phone Intercom is designed specifically for use as a warden intercom point (WIP) in emergency warning systems (EWS).
Microphone pre-amplifier
Microphone pre-amplifier for interfacing a remote microphone to the Pertronic 50 Watt 24 Volt evacuation amplifier EVAC50W24V
EABC Blocking Capacitor
Blocks the audio channel DC monitoring voltage to prevent erroneous monitoring faults from occurring when a common microphone is used.
AV Signs
Weatherproof Visual Warning Sign
Weatherproof Visual Warning Sign
AVS Weatherproof with Sounder
Audio Visual Sign, Weatherproof Version, with Sounder (Requires Separate Fascia)
AVSCM Countdown Module
Countdown Timer Module for Audio Visual Sign
Explosive Atmosphere
BEXL15DFV100AB1A1R Speaker
100V-Line 15 Watt horn speaker with series blocking capacitor for use in areas subject to explosive atmosphere
ISMTL5523 Solenoid Driver
Solenoid / alarm driver with galvanic isolator and line fault detection, for use in areas subject to explosive atmosphere
Mass Notification System
Wireless
Remote Vibrating Alarm System
Wireless system for deaf and hearing-impaired occupants. Controls up to 8 receivers, each with vibrating bed shaker and output for strobe